Portable Toilet/Shower
Toilet / Shower, Portable or Permanent Building – Designed for fast easy deployment and installation.
Solid steel-framed construction, the Toilet / Shower is a stand-alone building or can be connected to an existing building with mains power, sewerage and water.
Toilet / Shower, Portable or Permanent Building – Designed for fast easy deployment and installation.
Solid steel-framed construction, the Toilet / Shower is a stand-alone building or can be connected to an existing building with mains power, sewerage and water.
Technical Specification Details
External Length 1.84m (6.04ft)
External Width 1.60m (5.25ft)
External Height 2.44m (8.00ft)
Internal Length 1.74m (5.71ft)
Internal Width 1.50m (4.92ft)
Internal Height 2.30m (7.55ft)
Unit Weight 900kg (1,984 lbs)
Structure Insulated steel-framed modular unit
Roofing Sealed protective steel roof panel
Wind Rating N3 Wind Rating
Council Compliant:
- WELS compliant fixtures and fittings
- Electrical Test certificate to AS3000 Compliance
- Engineer’s Structural Certification available upon request – additional charges apply. This includes:
- Detailed plans for council submission
- Form 15 with N3 wind rating compliance
- Engineer footing design available, engineer certification by others.
Manufacture and Fittings:
- Strong shipping container style structure with insulated sides and roof
- N3 wind rating
- Roof is sealed and protected steel sheet
- 4 lifting lugs one in each corner and forklift pockets for transport and site location
- Easy clean floor, walls and ceiling
- Vented, key lockable door in steel frame
- Rear double glazed openable window
- Shower with rain maker shower head
- Polycarbonate shower screen
- Shower curtain
- Soap holder
- Toilet with soft close lid
- Toilet roll holders
- Toilet brush and wall mounted holder
- Vanity with sink and flick mixer
- Overhead cupboard with mirror
- Plumbing complete on the inside, ready for external connection
Electrical:
- Compliance to AS3000
- Electrical Certificate of Test confirming compliance to Electrical Safety Regulation 2013
Equipment Installed:
- External, IP 66 rated, Electrical Distribution Board for mains power connection
- External EDB is fitted with 1 x 2 pole 10amp circuit breaker
- Australian compliant light and power cable installed
- Australian compliant fixtures, 3 pin GPO, exhaust fan, internal ceiling light and light switch
WELS Compliance:
- All fixtures & fittings are WELS WATERMARK AS/NZS 6400:2016 water efficiency rated and compliant
- Toilet: WELS 4 Star, 4.5L full/3.1L half/3.4L average flush, Registration number L07047
- Hand basin tapware: WELS 5 Star, 6.0L/min, Registration number T38665
- Shower head: WELS 3 Star, 9.0L/min, Registration number S15160
- Hand shower: WELS 3 Star, 9.0L/min, Registration number S15318
Final Connections:
- Final connection of electrical by others
- Final connection of water and drainage by others, and Form 7 is supplied by the installing plumber













Rita Kelly –
This is what I need…
maria castillo –
No coment
Marco Aragon –
Que hay que hacer para compraron, dónde están?